longlegscanbeuseful Posted April 7, 2013 Report Share Posted April 7, 2013 Hi, can anyone help me identify which rear hub I have my 350 Gripper. I thought it was original until I went to fit a new sprocket. The bolt holes don't line up on a Talon TR-222. The hub and original spocket have 6 bolt holes spaced as 3 pairs, the pcd is approx 150mm. The new Talon sprocket has the same centre hole of 130mm, the same layout of bolt holes but the pcd is approx 160mm. The only similar hub/sprocket I can find is a Montesa Cota but I dont the dimensions. If anyone has either of these lying around, and a spare five minutes to measure pcd and centre hole it would be much appreciated. Cheers, Gary Quote Link to comment Share on other sites More sharing options...
bisby Posted April 8, 2013 Report Share Posted April 8, 2013 I was told that there is 3 different versions of the standard hub, i have in the past put the new sprocket on the hub and reposioned it and re drilled the sprocket. Hope this helps. Stephen. Quote Link to comment Share on other sites More sharing options...
longlegscanbeuseful Posted April 9, 2013 Author Report Share Posted April 9, 2013 Stephen, thanks for that. I was sure it was an original hub, I'll get the drills out. Bonus is a lighter sprocket but a long way to go to get modern weights. I nearly had a hernia putting on the bike lift after the TR280i. 1 Quote Link to comment Share on other sites More sharing options...
longlegscanbeuseful Posted April 9, 2013 Author Report Share Posted April 9, 2013 Just to update and hopefully save someone else the headache in the future. I've had some conversations with In Motion and Talon who are working together to issue the TR-222 as a double drilled option. Big thanks to both for the information. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.