sparks2 Posted April 15, 2013 Report Share Posted April 15, 2013 Hi Can anyone remember which way round the Cota 247 piston is assembled ? Long or short skirt to the front ? Thanks in anticipation. Regards Sparks2 Quote Link to comment Share on other sites More sharing options...
zerorev3rev4 Posted April 15, 2013 Report Share Posted April 15, 2013 (edited) i would expect long skirt to go to front exhuast side you could try it in and see where the ring gaps end up they dont want to pass passed the exhaust port ,,, does it have any windows in it Edited April 16, 2013 by zerorev3rev4 Quote Link to comment Share on other sites More sharing options...
sparks2 Posted April 17, 2013 Author Report Share Posted April 17, 2013 (edited) Hi Thanks for your reply zerorev3rev4 The pegs will miss the ports either way round. The transfer cutouts are symetrical, so again, will work either way. However, the consensus, is that the longer skirt should be to the front, just as you say. Thanks again. Regards Sparks2 Edited April 17, 2013 by sparks2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.