Jump to content

Coolant Change


jsp
 Share

Recommended Posts

 

I have!...easy job, undo the screw on the waterpump and let the fluid drain out, when it stops draining I leaned my bike over to both sides to get the last bit out, then ran some new fluid through to push out the last of the old stuff, put the screw back in and filled it up. ran the bike for a couple of mins to pump the fluid around and then checked to see if it needed a top up. 5 minute job.

Link to comment
Share on other sites

 
 
 
 
 
  • 2 weeks later...

canada280i you where right its a doddle to change the coolant in an ossa

I drained out the old and flushed it twice with water then refilled, changed

gearbox oil, changed front and rear brake pads and got the rear suspension

sag spot on, just need to get out on it now !!!! roll on bank holiday Monday

jsp

Link to comment
Share on other sites

 
  • 2 months later...

I just changed the coolant in my 2012 TR280i. When I checked to be sure there was enough coolant, I noticed a grey color and some kind of chunk in it. So I decided to replace it.

Here's what I removed.

wIMG_1357_zps48d400ad.jpg

I replace it with Engine Ice!

Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...