djkatoom Posted May 28, 2005 Report Share Posted May 28, 2005 I could do with some help with the fuel mixture screw setting for my '02 Sherco 290. Is there a standard setting (i.e all the way in and 1 & 1/4 turns back) or can someone tell me how best to set it up?! Thanks! Quote Link to comment Share on other sites More sharing options...
copemech Posted May 28, 2005 Report Share Posted May 28, 2005 3 or more turns out is usually required Quote Link to comment Share on other sites More sharing options...
charliechitlins Posted May 28, 2005 Report Share Posted May 28, 2005 When the mixture screw on my Sherco is spot on, I can ride in 4th gear just barely above chain-snatch speed, and a twist of the throttle gets the front end right up. That's my final test after the adjustment RS suggested above. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.