axulsuv Posted March 9, 2014 Report Share Posted March 9, 2014 Well I just installed a new pair of footpeg brackets , Thanks to Fantic 303 ! I tried for months to get some from that shop in France , but I could never get a response from them ... But '303 saved the day for me What a difference pegs mounted at the same angle make ! whoda thunk it ! Glenn 1 Quote Link to comment Share on other sites More sharing options...
eddie1 Posted March 9, 2014 Report Share Posted March 9, 2014 no mention of a nova1 ? Is this a form from HMRC if so no. The guides are a bit ambiguous on this but probably applies when you are actually importing new or used vehicles and registering them for the road. Hence it states that HMRC must be contacted within 14 days of import This part initially put me off but I concluded it was not relevant to my application. It seems so, The main problem with registering an old bike like the Fantic is that it may well have been registered before and that then would create a problem with regard to ownership. Quote Link to comment Share on other sites More sharing options...
totalshell Posted March 9, 2014 Report Share Posted March 9, 2014 regretably my 1953 AJS is hung up on dvla paperwork as i cannot produce a nova 1 and i m still waiting for hmrc to say they have no interest in it.. Quote Link to comment Share on other sites More sharing options...
eddie1 Posted March 10, 2014 Report Share Posted March 10, 2014 regretably my 1953 AJS is hung up on dvla paperwork as i cannot produce a nova 1 and i m still waiting for hmrc to say they have no interest in it.. Have you sent your application off or are you just thinking that you need a nova1. If DVLA are requesting HMRC clearance for a 1950s AJS then I count myself very lucky. If you have not sent the application off I would just fill in the form together with MOT. insurance etc. and importantly a dating letter with frame and engine no. from a recognised expert. My thoughts were that without the dating cert the vehicle details could appear vague. Good luck. Quote Link to comment Share on other sites More sharing options...
totalshell Posted March 10, 2014 Report Share Posted March 10, 2014 yup hung up on the nova1 from hmrc, dvla will not accept application without clearance from hmrc i have all the other stuff.. this is the second time i ve applied for it.. Quote Link to comment Share on other sites More sharing options...
janwillem Posted March 10, 2014 Report Share Posted March 10, 2014 Mounted a new chain and sprockets yesterday to my 305 and shortened the gearing a bit, 10 to 41, it was original, 11 to 39. What a difference this makes! sudently she will lift her frontwheel just on the throtle and she will crawl trough a section like she should! Quote Link to comment Share on other sites More sharing options...
motopelli Posted March 17, 2014 Report Share Posted March 17, 2014 Made a wiring harness and mounted the headlight on my 300 Quote Link to comment Share on other sites More sharing options...
motopelli Posted March 17, 2014 Report Share Posted March 17, 2014 oops! apologies for the sideways pics. I should have known better... Quote Link to comment Share on other sites More sharing options...
axulsuv Posted March 17, 2014 Report Share Posted March 17, 2014 (edited) Looking good !And what was the headlamp from ?? Edited March 17, 2014 by axulsuv Quote Link to comment Share on other sites More sharing options...
motopelli Posted March 17, 2014 Report Share Posted March 17, 2014 From a 307. Had to add the mounting ears on the bottom edge. Quote Link to comment Share on other sites More sharing options...
furse Posted April 19, 2014 Report Share Posted April 19, 2014 Finally finished the rebuild project of my 200 pro, been out for a test run this morning and its still awsome, just looks better. 3 Quote Link to comment Share on other sites More sharing options...
axulsuv Posted April 19, 2014 Report Share Posted April 19, 2014 (edited) TOO COOL !!!! what is the Swingarm from ??? BEAUTIFUL Bike ... Glenn and ps. How Tall are you ??? (bar risers and footpeg position?) Edited April 19, 2014 by axulsuv Quote Link to comment Share on other sites More sharing options...
furse Posted April 19, 2014 Report Share Posted April 19, 2014 Swing arm started out from Beta techno, and im 6ft 5 hence the risers Quote Link to comment Share on other sites More sharing options...
htrdoug Posted April 19, 2014 Report Share Posted April 19, 2014 (edited) Blew the rear fender off my 309 Had to say"I'll just do this big climb with step at the top one more time then I'm done for the day" And a couple of weeks back murdered my aftermarket 240 tank Cracked through just below the Fantic decal Again,5 minutes before I had planned to be done riding for the day... Edited April 19, 2014 by htrdoug Quote Link to comment Share on other sites More sharing options...
motopelli Posted May 5, 2014 Report Share Posted May 5, 2014 Finally got my motor, rebuilt by the Tryals Shop with 303 barrel, new piston bearings etc . It's a lot easier to install a 300 motor than it is a 240. Exhaust hooked up, new chain. Just had to put the body work on to have a look. Almost there1 4 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.