sting32 Posted June 7, 2013 Report Share Posted June 7, 2013 Ok, I'm a North american, and dont know anything about the subject I just started... and haven't seen, maybe someone has posted all of this info in another thread? But is Hebo dead? I'm due for more boots, I have 2 worn out pairs now. I tried the "latest" style a couple years back, the new ones with booties in them, they suck, wont fit my feet so I just kept wearing my originals. now I see I can't even find those anywhere in the UK sites, nor Ebay anymore. So what have you guys that were satisfied with hebo's classic boot, moved to? I can't be the only person with 4 year old Hebo boots that are starting to wonder what to replace them with? Quote Link to comment Share on other sites More sharing options...
axulsuv Posted June 7, 2013 Report Share Posted June 7, 2013 I wanted a hebo roller throttle /bar end for the section I'm building , but was told they are no longer ... DRAT !!! Glenn Quote Link to comment Share on other sites More sharing options...
laser1 Posted June 8, 2013 Report Share Posted June 8, 2013 Might try these guys http://www.scootracemoto.com/bottes-accessoires_de_bottes/bottes/bottes-hebo-technical-evo-p-3510.html Quote Link to comment Share on other sites More sharing options...
copemech Posted June 8, 2013 Report Share Posted June 8, 2013 Gaerne! Last longer Quote Link to comment Share on other sites More sharing options...
steve fracy Posted June 8, 2013 Report Share Posted June 8, 2013 Novogar are good too Quote Link to comment Share on other sites More sharing options...
zippy Posted June 8, 2013 Report Share Posted June 8, 2013 Alpinestars. As comfortable as a hiking boot. (I had an old pair of Gearnes and they was not very comfortable. insole was like a flat piece of wood, but not sure if that was how they came originally or if that was because of age/use) Quote Link to comment Share on other sites More sharing options...
guys Posted June 8, 2013 Report Share Posted June 8, 2013 I found the Gearnes I used to have more comfortable than the Alpinestars I now own. The Alpinestars offer more protection though. Quote Link to comment Share on other sites More sharing options...
copemech Posted June 9, 2013 Report Share Posted June 9, 2013 I wanted a hebo roller throttle /bar end for the section I'm building , but was told they are no longer ... DRAT !!! Glenn These may be similar, Glenn http://www.splatshop.co.uk/s3-handlebar-ends-end-5.html Quote Link to comment Share on other sites More sharing options...
axulsuv Posted June 9, 2013 Report Share Posted June 9, 2013 Thanks Mark , Jitse makes one too that has a brg. in it . But the Hebo one on my 240 with a aluminum throttle tube is the bomb , makes for a really smooth throttle pull . That S3 one looks like it depends on a nylon bushing against the inside of the Bar ... May work well with some graphite or such too !... Time will tell . Glenn Quote Link to comment Share on other sites More sharing options...
peterh Posted June 9, 2013 Report Share Posted June 9, 2013 One concern with the S3 with nylon bearing is that if you drop it on throttle side, the bar end sure protects but the throttle could still get stuck full on, as the bar end rotates with the throttle. 1 Quote Link to comment Share on other sites More sharing options...
jon v8 Posted June 11, 2013 Report Share Posted June 11, 2013 So does anyone know for sure that they have gone bust ? Be a darn shame if they have,the helmet I have is by far the best one I've had.The new waterproof jacket I had for Christmas is a top bit of kit,so is my bum bag. Quote Link to comment Share on other sites More sharing options...
toofasttim Posted June 12, 2013 Report Share Posted June 12, 2013 Apparently the founder (Narcis Cassas I think) sold the company and started MOTS. Quote Link to comment Share on other sites More sharing options...
nigel dabster Posted June 12, 2013 Report Share Posted June 12, 2013 As most of this stuff is "outsourced" the factories that produced hebo are now doing mots i think. Quote Link to comment Share on other sites More sharing options...
toofasttim Posted June 12, 2013 Report Share Posted June 12, 2013 As most of this stuff is "outsourced" the factories that produced hebo are now doing mots i think. Yup, if you look on the Hebo site they're not doing clobber any longer only scooter performance parts (that might be an oxymoron). 3 Quote Link to comment Share on other sites More sharing options...
smallboy Posted June 20, 2013 Report Share Posted June 20, 2013 Hi Anybody know were I can get HEBO MONTESA riding gear, Pidocks have sold out? Cheers David Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.