rodcub61 Posted July 11, 2013 Report Share Posted July 11, 2013 What is the best gearing set up for more top end on a mountain cub , it would do around 45mph normally but I am not going off road and would like to see maybe an extra 10mph......would fitting a normal tiger cub gearbox internals from a road going fit in and give me what I want ? Thanks in advance Quote Link to comment Share on other sites More sharing options...
naichuff Posted July 11, 2013 Report Share Posted July 11, 2013 I do not think you have to change the gearbox interals as top gear is 1to 1but check this You shuold check the rear sprocket and gearbox final drive sprocket to see what is fitted Most common seem to be 17t 48t rear Quote Link to comment Share on other sites More sharing options...
rodcub61 Posted July 12, 2013 Author Report Share Posted July 12, 2013 Will check the gearing as I strip the bike and will experiment to get best results cheers Quote Link to comment Share on other sites More sharing options...
danw43 Posted July 15, 2013 Report Share Posted July 15, 2013 UPB TIGER CUB AND ARMAC DESIGN DO A HIGH 4TH GEAR KIT. Quote Link to comment Share on other sites More sharing options...
danw43 Posted July 29, 2013 Report Share Posted July 29, 2013 Ive just fitted the upb gear kit to my cub,works a treat the second gear is low enough for hill climbs,and the 4th is high enough to not rev the knackers off the bike between stages. Regards Dan Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.