gbmoto Posted June 8, 2005 Report Share Posted June 8, 2005 Hi All I am putting lights on a Fantic 125 pro ( minimum for MOT ), do I need a regulator and what colour wires do I look for from the generator. Many thanks. Quote Link to comment Share on other sites More sharing options...
grib Posted June 8, 2005 Report Share Posted June 8, 2005 You don't need lights for an MOT, Check this link Quote Link to comment Share on other sites More sharing options...
jjwhite Posted June 8, 2005 Report Share Posted June 8, 2005 but if you are planning to ride in the great british weather then you may be caught our by fog at any time, at which point you can be done by police as it is reduced visibility, equally so if you get caught short so to speak, miss judging a journey (although i am not sure why anyone would want to go great distance on a trials bike) and ending up in twilight or darkness then again you can be done if pulled up by the coppers. Quote Link to comment Share on other sites More sharing options...
gbmoto Posted June 8, 2005 Author Report Share Posted June 8, 2005 Sorry chaps, I know I don't have to have them for the MOT, just need them as jjwhite says in case I get caught out by the weather etc. Just need them to pass the MOT rather than actualy to see by. Sorry for the confusion. Quote Link to comment Share on other sites More sharing options...
twhy Posted June 8, 2005 Report Share Posted June 8, 2005 yes you would need a regulator/rectifier other wise you will blow bulbs when you rev the bike. As reguards colors havnt got a clue, but dead easy to fine out which wire does what with a ac meter. Quote Link to comment Share on other sites More sharing options...
dabnabit Posted September 3, 2005 Report Share Posted September 3, 2005 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.