shercoben12 Posted July 20, 2013 Report Share Posted July 20, 2013 just to let anyone know - if your thinking off buying a 2013 factory rep raga DONT! they have come with a dodgy batch of main bearings! 5-6 have been recalled in the uk! Quote Link to comment Share on other sites More sharing options...
lineaway Posted July 21, 2013 Report Share Posted July 21, 2013 They probably were good bearings, just rusted in the crate! Quote Link to comment Share on other sites More sharing options...
nigel dabster Posted July 22, 2013 Report Share Posted July 22, 2013 (edited) Mine are fine, do you have a problem or is it hearsay, are all 750 affected? Edited July 22, 2013 by nigel dabster Quote Link to comment Share on other sites More sharing options...
toofasttim Posted July 22, 2013 Report Share Posted July 22, 2013 (edited) Ben, be careful when throwing around aspersions like that. Trials in a small market and you can cost the importers a whole heap of money and find yourself in big trouble. I appreciate you mean well but, unless you are absolutely 100% sure of your facts, it is best to keep them to yourself and not spread them around the internet. As an aside, your posts are a pleasure to read considering your age. You have restored my faith in the education system Edited July 22, 2013 by toofasttim 1 Quote Link to comment Share on other sites More sharing options...
baldilocks Posted July 22, 2013 Report Share Posted July 22, 2013 Read a few of your posts recently Ben not really a Gas Gas person perhaps ? Quote Link to comment Share on other sites More sharing options...
lineaway Posted July 22, 2013 Report Share Posted July 22, 2013 Oh, I forgot to ask Ben. How is the shift shaft repair going? Quote Link to comment Share on other sites More sharing options...
fullfactorykev Posted July 31, 2013 Report Share Posted July 31, 2013 just to let anyone know - if your thinking off buying a 2013 factory rep raga DONT! they have come with a dodgy batch of main bearings! 5-6 have been recalled in the uk! Just to let you all know, we at GGUK have had 3 Replica's out of 75 sold with main bearing problems, not 5-6 as above, there is no re-call as shercoben12 states, all have been done under warranty conditions within 2 days.....! You are quite right toofasttim, be very careful Ben with your statements as with the internet its a very small world.... 3 Quote Link to comment Share on other sites More sharing options...
zippy Posted July 31, 2013 Report Share Posted July 31, 2013 Just to let you all know, we at GGUK have had 3 Replica's out of 75 sold with main bearing problems, not 5-6 as above, there is no re-call as shercoben12 states, all have been done under warranty conditions within 2 days.....! You are quite right toofasttim, be very careful Ben with your statements as with the internet its a very small world.... I tip my hat to you for being honest that 3 have had problems. I tip my hat again to the fine service provided to have them repaired. 2 Quote Link to comment Share on other sites More sharing options...
b40rt Posted July 31, 2013 Report Share Posted July 31, 2013 Just to let you all know, we at GGUK have had 3 Replica's out of 75 sold with main bearing problems, not 5-6 as above, there is no re-call as shercoben12 states, all have been done under warranty conditions within 2 days.....! You are quite right toofasttim, be very careful Ben with your statements as with the internet its a very small world.... Good to hear problems being faced head on. Ben probably to young to be sued, Andy however ......... 1 Quote Link to comment Share on other sites More sharing options...
sting32 Posted July 31, 2013 Report Share Posted July 31, 2013 Would be nice to know what was the actual problem, I see you could fail to align the oil galley to holes, or was it bad MFG parts or bad something else... I mean obviously gasgas doesn't make the bearings, they buy them... Quote Link to comment Share on other sites More sharing options...
b40rt Posted July 31, 2013 Report Share Posted July 31, 2013 ... I mean obviously gasgas doesn't make the bearings, they buy them... They do spek them though !! Quote Link to comment Share on other sites More sharing options...
zippy Posted August 1, 2013 Report Share Posted August 1, 2013 Would be nice to know what was the actual problem, I see you could fail to align the oil galley to holes, or was it bad MFG parts or bad something else... I mean obviously gasgas doesn't make the bearings, they buy them... Even if GasGas does Spec the bearings does not mean a batch may not have been made a little off spec and not noticed before shipping to GasGas. Hell, for an example (and frustration) just look at the auto industry and the numerous bad parts they receive/sell straight from new. Quote Link to comment Share on other sites More sharing options...
shercoben12 Posted August 1, 2013 Author Report Share Posted August 1, 2013 Sorry GGUK! I didnt mean to cause this... That was just what a frie d told me and he knows alot about the trials scene. Line away - the rebuild went smooth nice and cheep also! Was just a collapsed bearing.... Hardest part was getting the swing arm spindle out! Quote Link to comment Share on other sites More sharing options...
toofasttim Posted August 8, 2013 Report Share Posted August 8, 2013 Kev, were they brinelled? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.