big wheeler Posted June 12, 2005 Report Share Posted June 12, 2005 Hi here i am with yet another set of questions for your deliberation What size thread is in the flywheel ie pitch and diameter as i want to make or buy a puller, i suppose they are left handed Does anyone have or know where i can get a manual for the tr34 Does anyone have any spares they would like to part with You chaps have been great so far and its nice to know where i can turn when im stuck Thanks once again mark Quote Link to comment Share on other sites More sharing options...
Andy Posted June 12, 2005 Report Share Posted June 12, 2005 Was that the 12" remix? I've deleted the duplicate postings Quote Link to comment Share on other sites More sharing options...
big wheeler Posted June 12, 2005 Author Report Share Posted June 12, 2005 cheers andy dont know what i was playing at Quote Link to comment Share on other sites More sharing options...
big wheeler Posted June 13, 2005 Author Report Share Posted June 13, 2005 Yes sounds easy i can measure the thread diameter but im unable to get into the threads with pitch gauges due to crank being in the way and thought if anyone could tell me sizes it would save a lot of messing around cheers mark Quote Link to comment Share on other sites More sharing options...
big wheeler Posted June 13, 2005 Author Report Share Posted June 13, 2005 yes it would be easy but my pitch gauges are too big to fit between crankshaft and flywheel I realise you can spend a lot of money repairing a older bike but i have good reason to restore this one I only paid Quote Link to comment Share on other sites More sharing options...
big wheeler Posted June 14, 2005 Author Report Share Posted June 14, 2005 Good idea the modelling clay but managed to find some pitch gauges at work that will fit inside,will have to measure tomorrow and yes it was a runner before stripping just down on power due to bore wear .i will try to post some pics as rebuild continues yours mark Quote Link to comment Share on other sites More sharing options...
big wheeler Posted June 15, 2005 Author Report Share Posted June 15, 2005 cheers i was thinking of using a firm called dps who advertise in trials and mx news but i suppose they will just sub it out anyway so decided to send to langcourts Quote Link to comment Share on other sites More sharing options...
big wheeler Posted June 21, 2005 Author Report Share Posted June 21, 2005 Thanks for the info i will be using langcourts for sure and for anyone who is intrested the thread on a tr34 flywheel is 26mm x 1.5 pitch and the 26mm is a right hand thread unlike on some machines which are coddy handed cheers mark Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.