bondy Posted August 14, 2013 Report Share Posted August 14, 2013 hi guys dose anybody know if this is the correct way for the kickstart rachet? also will a 199A crank case fit the 250? Quote Link to comment Share on other sites More sharing options...
stevem75 Posted August 14, 2013 Report Share Posted August 14, 2013 From your picture that does appear to be correct. However the shaft also needs to be preloaded with spring tension in order for that ratchet to return . So long as the shaft returns or "springs back" and the ratchet locates back to where I see it in your picture then its installed correctly. The 199a case will not fit the 250. the crankcase openings are a different size. Steve Quote Link to comment Share on other sites More sharing options...
bondy Posted August 14, 2013 Author Report Share Posted August 14, 2013 hi steve yes the the spring is preloaded and dose return. am just testing to see if i can get the gearbox to go in correct am using a 199A crank case has my 198A cases are away being cleand so want to get it spot on dont fancy doing it twice. i have all the new bearings ready to be fitted. and the crank is having a new conrod and new bearing. cheers. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.