maxbikes Posted September 19, 2013 Report Share Posted September 19, 2013 I need to replace my footrests on tlr250.what ones fit?looking through ebay there are lots of nice alloy ones.for gas gas and other bikes.will these fit easily? or if I get steel ones I can modify with welder as I can only weld steel. Quote Link to comment Share on other sites More sharing options...
not ron Posted September 19, 2013 Report Share Posted September 19, 2013 Genuine Honda XR footrests fit straight on and are bigger, 50616-KFB-000 and 50642-KFB-000 Quote Link to comment Share on other sites More sharing options...
hoboarchery Posted September 20, 2013 Report Share Posted September 20, 2013 will they fit the TLR200 as well? Quote Link to comment Share on other sites More sharing options...
tlrmark Posted September 20, 2013 Report Share Posted September 20, 2013 Hob, the tlr200 and tlr250 footpeg mounting bracket are very different unfortunately. Quote Link to comment Share on other sites More sharing options...
maxbikes Posted September 20, 2013 Author Report Share Posted September 20, 2013 looked at xr footrests good idea being a bit bigger as standard ones are very small a job to keep my size 12 feet on.ive noticed on ebay that I can buy ones that I could modify they come flat so can be bent to suit so I could enlarge standard ones perhaps lower them as well. Quote Link to comment Share on other sites More sharing options...
barfy Posted September 22, 2013 Report Share Posted September 22, 2013 I've used XR400 foot rests on my TLR and RTL. They are quite a bit wider than the standard ones and I got them from Off Road Only (https://www.catalyst-findit.co.uk/index.php?c=d2f5d910014f2842ada1bbc16c273aae&vat=ex&dest=prod&p=514&pid=60-200.DR). I'd probably give them a ring to make that they fit the XR400, because the ones in the picture look to have a slightly different mount. Quote Link to comment Share on other sites More sharing options...
chuckindenver Posted September 24, 2013 Report Share Posted September 24, 2013 i use CRF pit bike steel pegs..i cut them off, and welded them back on one inch back, one inch down..works great,. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.