billyt Posted October 2, 2013 Report Share Posted October 2, 2013 Hey Chuck A question: Did you replace the stock air screw at the bottom of the 4T (the one that is a bitch to get to) with an after market thumb adjuster? If so, where did you source it from? Thanks Chuck Quote Link to comment Share on other sites More sharing options...
chuckindenver Posted October 2, 2013 Report Share Posted October 2, 2013 no i never have...iv only put 14 hours on it,, rode the twin shocker and the TR34 most the year,, i was plaining on high temp soldering a snake exention on it this winter.. might ride it this weekend,. will see, still have the dont scratch it ju ju .. Quote Link to comment Share on other sites More sharing options...
0007 Posted October 3, 2013 Report Share Posted October 3, 2013 I know on most kei hin carb dirt bikes there is only one style fuel screw that fits all Maybe a local shop has one for under $20, we keep them in stock, not hard to find Quote Link to comment Share on other sites More sharing options...
chuckindenver Posted October 4, 2013 Report Share Posted October 4, 2013 they use CV carbs,..and the screw is in a bad place...have yet to find a remote adjustment screw,. i plan on making my own, though i havnt had to adjust much beyond the idle setting Quote Link to comment Share on other sites More sharing options...
0007 Posted October 4, 2013 Report Share Posted October 4, 2013 I haven't looked at one close, is it in a spot where a thumb screw won't work? On snowmobiles we used to silver solder a few inches of speedo or tach cable to the screw so it could be located remotely Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.