b40rt Posted October 18, 2013 Report Share Posted October 18, 2013 Anybody got a inlet to carb rubber ? I've tried Martin and Jumbostu. Thanks Ross Must be the SWM straight one, not the cranked Aprilia etc. Quote Link to comment Share on other sites More sharing options...
pschrauber Posted October 18, 2013 Report Share Posted October 18, 2013 Are the inlet manifolds Martin had sold out? There was an Italian resource, ... if in need I can look up? Quote Link to comment Share on other sites More sharing options...
b40rt Posted October 18, 2013 Author Report Share Posted October 18, 2013 Hi Patrik, Martin sells the manifold from air box to carb, but hasn't got any of the carb to inlet at the moment. Ross 1 Quote Link to comment Share on other sites More sharing options...
b40rt Posted October 18, 2013 Author Report Share Posted October 18, 2013 Part no 267 790 Quote Link to comment Share on other sites More sharing options...
pschrauber Posted October 18, 2013 Report Share Posted October 18, 2013 Seems to be that 267 790 is sold out again, even in France as brp-rotax and Atelier bmz don't sell them anymore. As I know the replica manifold batch was made in summer 2012 in Italy, it should have been them: http://www.swm-moto.org/ You might ask them, if they have one left. Quote Link to comment Share on other sites More sharing options...
b40rt Posted October 19, 2013 Author Report Share Posted October 19, 2013 Thanks Patrik, not in a hurry, hopefully one will turn up ! Quote Link to comment Share on other sites More sharing options...
baldilocks Posted October 20, 2013 Report Share Posted October 20, 2013 Right then fellas after talking about it for years next friday I am collecting my first SWM. Looking about where do you get specific swm bits like air filters, points (assuming its points) mudguards, pistons etc ? I dont need these bits now im just trying to plan ahead. Quote Link to comment Share on other sites More sharing options...
b40rt Posted October 20, 2013 Author Report Share Posted October 20, 2013 http://www.motoswm.com/ Glen, thought for a moment you were going to help me ! Martin at the site above has a huge selection of new and second hand parts. Rotax motors as you know are hardy beasts, a bit of slap is not a problem. Lots of helpfull, knowledgeable and smart people on here (that's why they have swm' s) 1 Quote Link to comment Share on other sites More sharing options...
kt6877 Posted October 24, 2013 Report Share Posted October 24, 2013 I need also one to my 125. If you find one let me know! Quote Link to comment Share on other sites More sharing options...
reginald Posted October 28, 2013 Report Share Posted October 28, 2013 I need also one to my 125. If you find one let me know! Martin suggested he had some of the 125 carb to inlet boots. http://www.motoswm.com/ Quote Link to comment Share on other sites More sharing options...
mudyman Posted October 31, 2013 Report Share Posted October 31, 2013 Hi Ross, if you find a source let me have it as I need 2 of them ! Cheers Ian Quote Link to comment Share on other sites More sharing options...
b40rt Posted October 31, 2013 Author Report Share Posted October 31, 2013 Will do, I've got a second hand one coming from a military bike, soon as its here and compared I will come back to you. 1 Quote Link to comment Share on other sites More sharing options...
motoswm Posted November 2, 2013 Report Share Posted November 2, 2013 Hi Ross The military motor uses a Bing carb as its based around the early RSGS enduro motor. So the carb rubber will be too big for your Dellorto. I have a couple of new original 125 carb rubbers here.....but the hole on these is too small for the 320 valve and carb. Martin Quote Link to comment Share on other sites More sharing options...
mudyman Posted November 3, 2013 Report Share Posted November 3, 2013 I have a 320 that had a bing carb fitted and yes its bigger (this bike also had a different sort of clutch cover that I think Martin said was from an early Military??). At present its got some insulating tape round the Dellorto carb to seal it up. This is one of the ones where I wolud like to change it. Ian Quote Link to comment Share on other sites More sharing options...
b40rt Posted November 3, 2013 Author Report Share Posted November 3, 2013 Hasn't arrived yet, but sure I can have an adaptor made up in alloy and shrink fit it to the carb. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.