zacmul Posted December 5, 2013 Report Share Posted December 5, 2013 Hi all, The other day we went and picked up a Ty that my Dad had bought off a guy on eBay for a new project. The bike isn't in the best condition but it has a really strong engine with no rattles. And the bash plate has barely any scratches showing that it has had very little use too. But once we got it home we noticed that the front down-tubes on the frame were bent. He has three other 250's (an "A",a "B", and an "E") and none of them have bent tubes. There are no signs of dents on the tubes or any damage at all really. So I was just wondering if anybody has seen this before. Could it be factory? Or is it just damaged? Cheers, Zac P.S, Sorry for the bad photos. Quote Link to comment Share on other sites More sharing options...
zacmul Posted December 5, 2013 Author Report Share Posted December 5, 2013 By the way the guy put a DT250 front end on it for some reason. Quote Link to comment Share on other sites More sharing options...
feetupfun Posted December 5, 2013 Report Share Posted December 5, 2013 Standard TY250 twinshock frames have straight front downtubes. That one has either had an accident, or someone has deliberately bent those tubes to change the steering head angle. Have a look with the tank off and see if the top tube is bent too. I've seen a few with the top tube bent from a frontal impact Quote Link to comment Share on other sites More sharing options...
feetupfun Posted December 5, 2013 Report Share Posted December 5, 2013 By the way the guy put a DT250 front end on it for some reason. maybe because the TY fork tubes were bent in a frontal impact???? 1 Quote Link to comment Share on other sites More sharing options...
zacmul Posted December 5, 2013 Author Report Share Posted December 5, 2013 Ah, ok, that makes a bit of sense, but the owner said that the bike was never used in competition, only around the farm then stored, So I don't know about the being purposely bent but it's a possibility. Quote Link to comment Share on other sites More sharing options...
zacmul Posted December 5, 2013 Author Report Share Posted December 5, 2013 maybe because the TY fork tubes were bent in a frontal impact???? It also came with the TY front end too just missing the wheel spacer, not sure if it is original to the bike though. It could have been crashed, I will have a better look tomorrow. Cheers. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.