richard55 Posted January 1, 2014 Report Share Posted January 1, 2014 hi ,any one had much success lightning clutch action on Mk 1 mar .I have lenghtened the actuating arm on top of the crank case , and used one of those geared type levers at the handle bar .still very heavy . Quote Link to comment Share on other sites More sharing options...
zerorev3rev4 Posted January 1, 2014 Report Share Posted January 1, 2014 have you tried a clutch lightener fits on cable near lever or is that what you mean by geared lever ,, a good quality long lever will help and make sure cable is good and everything is in line , i tried a clutch on a gripper as standard and was surprised how light it was Quote Link to comment Share on other sites More sharing options...
lineaway Posted January 2, 2014 Report Share Posted January 2, 2014 Have you read this post, Woody had a few suggestions. http://www.trialscentral.com/forums/topic/48672-ossa-mar/ Quote Link to comment Share on other sites More sharing options...
richard55 Posted April 17, 2014 Author Report Share Posted April 17, 2014 Have you read this post, Woody had a few suggestions. http://www.trialscentral.com/forums/topic/48672-ossa-mar/ I have now fitted barnett friction plates [ thanks woody] great clutch now ,fitted lighter springs ,tried different tensions ,but settled on srewing in fully and then backing out two full turns . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.