robf Posted January 3, 2014 Report Share Posted January 3, 2014 Hi guys I am sure I read somewhere about using a Montesa 315r on a modified TY250 twin shock airbox I have seen the one on the very cool highly modified TY in one of the mags and on here but that uses a custom airbox and I want to use a standard ( but of course modified ) airbox Has anyone done this mod - if so can you please tell me how you did it or even better if you have a picture Quote Link to comment Share on other sites More sharing options...
mattylad Posted January 4, 2014 Report Share Posted January 4, 2014 cut a flat plate of 3 or 4mm alloy to fit onto standard air box, then cut out centre to fit mont filter Quote Link to comment Share on other sites More sharing options...
motovita Posted January 5, 2014 Report Share Posted January 5, 2014 cut a flat plate of 3 or 4mm alloy to fit onto standard air box, then cut out centre to fit mont filter Does that normally require jetting changes? Quote Link to comment Share on other sites More sharing options...
mattylad Posted January 5, 2014 Report Share Posted January 5, 2014 I used a Mont 315r carb on mine which was pretty sorted. Never used the original Mikuni. Quote Link to comment Share on other sites More sharing options...
robf Posted January 6, 2014 Author Report Share Posted January 6, 2014 Hi Mattylad Thanks for the reply - any chance of a pic of your airbox ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.