mattylad Posted January 20, 2014 Report Share Posted January 20, 2014 I have seen the extending plates to weld onto the standard swing arm, however is there a longer model from another bike that will fit? I have a mini majesty frame that came without a swing arm and am looking to extend by 2 to 3 inches. Any photos of your solution welcome. Quote Link to comment Share on other sites More sharing options...
bestrcpilot Posted January 20, 2014 Report Share Posted January 20, 2014 I used a swingarm from a 1975 DT175 it is longer then the Ty175 arm by about 2.25 inches. It needs the brake arm mound cut off and moved. I'll post pictures when I get to my laptop. Quote Link to comment Share on other sites More sharing options...
bestrcpilot Posted January 21, 2014 Report Share Posted January 21, 2014 (edited) Here are the Pictures of my TY175 with a DT175 swingarm I hope As you can see I moved the front mount closer to the engine. And as the DT175 swingarm is wider at the back then the TY175 arm I had to use a 1/2 inch spacer on the left side. Edited January 21, 2014 by bestrcpilot Quote Link to comment Share on other sites More sharing options...
mattylad Posted January 22, 2014 Author Report Share Posted January 22, 2014 Perfect looks just the job. Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.