wfo speedracer Posted March 5, 2015 Author Report Share Posted March 5, 2015 Second time should be the charm on this one, I will pull it off and trim it tomorrow. Quote Link to comment Share on other sites More sharing options...
wfo speedracer Posted March 9, 2015 Author Report Share Posted March 9, 2015 I believe I pretty much nailed it second time around, I have to build up the glass in some areas but the fit is perfect. Quote Link to comment Share on other sites More sharing options...
wfo speedracer Posted March 16, 2021 Author Report Share Posted March 16, 2021 I realize this has been a dead thread for quite sometime but after several adventures I am back on it ., frame has been painted and we are rolling again Quote Link to comment Share on other sites More sharing options...
wfo speedracer Posted March 16, 2021 Author Report Share Posted March 16, 2021 And then this happened, that is a mold for the custom carbon fiber tank shell and the mini tank that goes under it 1 Quote Link to comment Share on other sites More sharing options...
wfo speedracer Posted March 16, 2021 Author Report Share Posted March 16, 2021 I also made a support for the frame and welded it up, picture of the plug for the mold also 1 Quote Link to comment Share on other sites More sharing options...
wfo speedracer Posted March 21, 2021 Author Report Share Posted March 21, 2021 So whoever said that TL 125 rims lace right up and work lied or at the very least left out some important details, they might lace up but not with stock spokes, I am not really fully grasping what is going one here but all of the longer spokes are too long and the shorter spokes are too short, the DID rims have a deep drop center which throws everything off, of course I found this out afte puling apart two front rims and lacing the DID up to the TLR front hub, kinda p****d right now. Quote Link to comment Share on other sites More sharing options...
frozenlatino Posted March 21, 2021 Report Share Posted March 21, 2021 So if i get this correct ... that's the mold you are going to use to build it with carbon fiber right? you will keep posting pictures of the progress I hope:-) So from the seat mold you then use the original tank to build it or the mini tank? is that mini tank form a particular pit bike like a KTM 50? what kind of fiberglass you use to make the mold? is just looks so clean and thin !!!! Quote Link to comment Share on other sites More sharing options...
wfo speedracer Posted March 21, 2021 Author Report Share Posted March 21, 2021 (edited) Yes that's the mold in the pic, type of fiberglass does not really matter unless you are doing a production mold that will be making many parts, yes I had an old beater tank that was crusty and rusty, I also had the fiberglass seat piece I had already made, I just combined the two, the plastic tank is off a Ktm 50. Those last two pics were of the plug the mold was made from. I will be posting pics I am making the shell out of carbo fiber , it won't be visual carbon , it will be painted. Edited March 21, 2021 by wfo speedracer Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.