ric h Posted February 17, 2014 Report Share Posted February 17, 2014 (edited) Having a tough time getting the linkage apart.Any tips from those in the know? Edited February 17, 2014 by ric h Quote Link to comment Share on other sites More sharing options...
canada280i Posted February 18, 2014 Report Share Posted February 18, 2014 (edited) Ric what part are you struggling with? I just stripped and regreased them on Saturday morning, spring washers were te only tough part, mainly because my pliers are crap other than that seemed pretty straight forward Edited February 18, 2014 by canada280i Quote Link to comment Share on other sites More sharing options...
ric h Posted February 18, 2014 Author Report Share Posted February 18, 2014 The small pivot shaft right under the swingarm pivot is being stubborn.Tap it out with a drift maybe? Quote Link to comment Share on other sites More sharing options...
jsp Posted February 18, 2014 Report Share Posted February 18, 2014 the one held into a tube with two internal spring clips ? mine was very tight, it took fair bit of force to get it out Quote Link to comment Share on other sites More sharing options...
canada280i Posted February 18, 2014 Report Share Posted February 18, 2014 Yes, it is a tight fit, I had to drift mine like JSP says with quite a bit of force to get it moving but once goig just slid out. Quote Link to comment Share on other sites More sharing options...
ric h Posted February 19, 2014 Author Report Share Posted February 19, 2014 Thanks guys.Does it matter which side it comes out? Quote Link to comment Share on other sites More sharing options...
canada280i Posted February 19, 2014 Report Share Posted February 19, 2014 I don,t think so, if it helps I drifted mine from the right side to the left as you sit on the bike and reinserted the same way, from right to left, only because I found it easier to get to tat way Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.