Jump to content

Mixture Screw Settings


blackpoolsherco
 Share

Recommended Posts

 

 
 

Set the screw 1.5 turns out. Fully warm the bike up and set tickover very slightly fast. Adjust mixxture screw until tickover is at its fastest then reduce tickover to normal using tickover screw.

Mixture screw should be between 1 and 2.5 turns out otherwise jetting or float level adjustments may be needed.

Ride the bike and check it picks up instantly and cleanly, if not try adjusting mixture screw 1/8th of a turn either way.

That is a VERY brief guide

Link to comment
Share on other sites

 

Set the screw 1.5 turns out. Fully warm the bike up and set tickover very slightly fast. Adjust mixxture screw until tickover is at its fastest then reduce tickover to normal using tickover screw.

Mixture screw should be between 1 and 2.5 turns out otherwise jetting or float level adjustments may be needed.

Ride the bike and check it picks up instantly and cleanly, if not try adjusting mixture screw 1/8th of a turn either way.

That is a VERY brief guide

another way

start at 1 1/2 out and turn in until the idle changes, remember setting. Turn out until the idle changes, remember setting. Set at the middle (remembered settings) +1/8-1/4 turns.

Link to comment
Share on other sites

 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...