dnym Posted April 23, 2014 Report Share Posted April 23, 2014 does anyone know which way the coned washer/spacer goes in the USD forks on a beta rev 3..2000.it sits behind oil seal Quote Link to comment Share on other sites More sharing options...
lineaway Posted April 24, 2014 Report Share Posted April 24, 2014 Same way as you took it out. You likely are not making it taller. If that helps. Remember the seal holder actually floats. Quote Link to comment Share on other sites More sharing options...
dnym Posted April 24, 2014 Author Report Share Posted April 24, 2014 thanks for ya help..only problem is I cant remember which way it came out.. and domt want to force it as dont want t damage new seals Quote Link to comment Share on other sites More sharing options...
lineaway Posted April 24, 2014 Report Share Posted April 24, 2014 The flat side to the bottom of the holder. I usually put the fork body in a vice (aluminum jaws, not tight ) with the seal holder just resting on the top of the jaws so the holder does not move while installing seals. Hope this helps. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.