mags Posted June 2, 2014 Report Share Posted June 2, 2014 I've noticed the kickstart lever on my 2014 hits the foot peg if you push the lever down too far!!! I went too far a couple of times and put some marks in the end of the lever so decided to make a kickstart lever rubber until I come up with something better. I used a bit of red car heater hose. The internal diameter pushes pretty firm over the end of the lever and seems to stay on well when I kick it over. It may get slippery in wet conditions but so far seems ok in the dry. I used a Dremel tool to create a few craters for grip and with a wet boot may still grip well enough for a start???? Time will tell but no more hitting ally to steel with the hose on. Does everyone's hit a bit or is it just mine? I see its machined on the end so maybe they all do it and the machined relief at the end of the lever is a meagre attempt to stop it??? Mags Quote Link to comment Share on other sites More sharing options...
warby beta Posted June 2, 2014 Report Share Posted June 2, 2014 Yes my mates 260 started doing this yesterday. Going to look into a fix this week. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.