thomastomsk Posted July 7, 2014 Report Share Posted July 7, 2014 I have just bought a 2013 300 raga to replace my 2012 one and when I went to set the rear shock up I found that it was upside down compaired to the 2012 raga,ie the compression is at the bottom not the top and I am finding it hard to adjust it because of the linkage,is there an easy way or do I have to take the shock off to adjust the compression thanks for any info kind regards tommy Quote Link to comment Share on other sites More sharing options...
aussiechris Posted July 23, 2014 Report Share Posted July 23, 2014 Hi Thomas, this is a bit late I know. I have a 2011 Raga with the Reiger shock. I find it's very easy to adjust. For the bottom adjustment, I just go in with a long screw driver (about 8 inch). It goes just below the swing arm and just above the left dog bone (that's with the bike supported on a stand). The top adjuster is easy using the special tool that should have come with the bike. Chris. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.