darrenc Posted July 10, 2014 Report Share Posted July 10, 2014 has any body put electronic ignition on a 250t ? this bike has motoplat ignition and can't get the timing right it fire ring about 10 deg before TDC and now more movement on the back plate . Thank Darren Quote Link to comment Share on other sites More sharing options...
zerorev3rev4 Posted July 10, 2014 Report Share Posted July 10, 2014 when should it fire , are the parts standard Quote Link to comment Share on other sites More sharing options...
darrenc Posted July 11, 2014 Author Report Share Posted July 11, 2014 the book said 2.7 after TDC and the points are at 40mm. i'm using a strobe light to check this is this the best way to check it ? Quote Link to comment Share on other sites More sharing options...
bullylover Posted July 11, 2014 Report Share Posted July 11, 2014 Hi Darren. The best way to time an Italjet is to use a multi meter and a dial gauge. You hook the multi meter up to the black ignition wire going to the coil and to earth and put the dial gauge in the spark plug hole and get the points to start to open at 2.7mm BTDC. You will see on the multi meter when the points start to open. I hope this helps you out. Graham. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.