gasgas694 Posted July 23, 2014 Report Share Posted July 23, 2014 i am going to do my 1st oil change on my new 2012 gas gas 300 how much oil am i meant to put in? 400ml? or just take it to the top of the sight glass? cheers Quote Link to comment Share on other sites More sharing options...
paulmac Posted July 24, 2014 Report Share Posted July 24, 2014 400 ml should be close - top tip from our local 'hot shots' is two thirds up the sight glass with bike standing on both wheels. Paul Mac Quote Link to comment Share on other sites More sharing options...
guys Posted July 24, 2014 Report Share Posted July 24, 2014 Half way the sight glass is what GasGas recommends. With more in it you risk clutch drag. Quote Link to comment Share on other sites More sharing options...
crazybond700 Posted July 24, 2014 Report Share Posted July 24, 2014 Too much willcan take your seals out (or it will come trough the breather). Too less will potentially cause more friction in the gears etc so more wear. Its around 385 I always use. Depends also how good you managed to get the oil out. I dont fill up more than half the glass. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.