cascao Posted July 29, 2014 Report Share Posted July 29, 2014 I had to replace the water pump seal im my 10' Sherco. (no parts avaiable in Brasil!) I was't able to find this seal here. So, I had to do something to keep ridding. 1 Quote Link to comment Share on other sites More sharing options...
mags Posted July 29, 2014 Report Share Posted July 29, 2014 (edited) Nice work! I did quite a bit of machining when a youngster. I hope to have these installed early next year (pics below). I am sick of not being able to buy things that could be machined easily. Like a 25mm spacer washer, 4mm thick with a 5 mm bore for example. I have two motorcycles to restore, one I've had for 32 yrs so parts are rare. The machines below are reasonably priced... cost around the same as a Montesa Repsol here, for both!!! Mags Edited July 29, 2014 by mags Quote Link to comment Share on other sites More sharing options...
copemech Posted July 30, 2014 Report Share Posted July 30, 2014 That is a good trick, and I was wondering if the cutoff was going to roll around the shop never to be found again! I will wait for mine in the postal delivery! Quote Link to comment Share on other sites More sharing options...
copemech Posted July 30, 2014 Report Share Posted July 30, 2014 Nice work! I did quite a bit of machining when a youngster. I hope to have these installed early next year (pics below). I am sick of not being able to buy things that could be machined easily. Like a 25mm spacer washer, 4mm thick with a 5 mm bore for example. I have two motorcycles to restore, one I've had for 32 yrs so parts are rare. The machines below are reasonably priced... cost around the same as a Montesa Repsol here, for both!!! Mags 375.jpg 375a.jpg I think you can have that washer done for less than 10 K mate! 1 Quote Link to comment Share on other sites More sharing options...
mags Posted July 30, 2014 Report Share Posted July 30, 2014 I think you can have that washer done for less than 10 K mate! Ahahahahahahaha! Very Good! I could buy thousands for 10K but would they be as shiny! Hehehehehe Mags Quote Link to comment Share on other sites More sharing options...
cascao Posted July 30, 2014 Author Report Share Posted July 30, 2014 Sometimes in my bike I took 4 times the time and effort to be at same places I can go in my car. Hobby machinists buy expensive tools and spent so many time doing something for the same reason: fun! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.