wallo Posted August 5, 2014 Report Share Posted August 5, 2014 OK, so next question on the beezer :-) How do you remove the clutch operating arm from the drive that moves the push rod, is it a screw fix or taper? Thanks Quote Link to comment Share on other sites More sharing options...
whinger Posted August 5, 2014 Report Share Posted August 5, 2014 Hi Wallo they unscrew , but be careful how you jam the small gear the ally breaks really easy Quote Link to comment Share on other sites More sharing options...
wallo Posted August 6, 2014 Author Report Share Posted August 6, 2014 Thanks Quote Link to comment Share on other sites More sharing options...
old bones Posted August 6, 2014 Report Share Posted August 6, 2014 The small pinion which acts upon the rack is fitted onto the spindle with a left hand thread, if you leave the pinion in its recess and TAP!!! the arm in a CLOCKWISE direction it should come loose. To fit it back on, fit the bits together and hold it in soft jaws in a vice or "G" clamp and again TAP in the opposite direction just to lock it up. And as Whinger said "BE CAREFUL" Good Luck Quote Link to comment Share on other sites More sharing options...
wallo Posted August 6, 2014 Author Report Share Posted August 6, 2014 Thanks for the left hand thread heads up, I would have certainly snapped it otherwise :-( 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.