haza3348 Posted August 6, 2014 Report Share Posted August 6, 2014 Hi I have a 280 pro with a slipping clutch when accelerating, changed the gear oil to putoline light gear and that's not cured it. I'm thinking a new set of clutch plates. Is there anything else I should try or check before I get new plates? Thanks, harry Quote Link to comment Share on other sites More sharing options...
thats_a_five Posted August 7, 2014 Report Share Posted August 7, 2014 You can measure the fiber and steel thickness. Also measure the Belleville washer. If they are worn too think they need to be replaced. Quote Link to comment Share on other sites More sharing options...
laser1 Posted August 8, 2014 Report Share Posted August 8, 2014 Do you have some free play at the lever? Quote Link to comment Share on other sites More sharing options...
burnleytazz Posted August 13, 2014 Report Share Posted August 13, 2014 You dont need a full clutch pack just measure the hight of the fingers and you can buy different thickness steel plates to bring the finger hieght up. you can do this to adjust clutch lightness. I had this problem when i got mine. I decided to go on atf oil wich swelled the fibers up. All i needed was 1 different thickness steel plate hope this helps there are plenty of threads on ere about clutch pack measurments Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.