zazoo Posted August 11, 2014 Report Share Posted August 11, 2014 Any help on this appreciated. Some time back I bought a TX 250 with a 200 engine in bits. While putting the rear wheel into the swinging arm, there seemed something missing. In the bits bin I found a nylon sleeve that fits inside the hub. Am I being a numbskull, does this belong in here or am I missing something? Quote Link to comment Share on other sites More sharing options...
zerorev3rev4 Posted August 11, 2014 Report Share Posted August 11, 2014 you need a spacer tube inside the hub inbetween the bearing centres , not sure if nylon ones were ever used Quote Link to comment Share on other sites More sharing options...
zazoo Posted August 11, 2014 Author Report Share Posted August 11, 2014 Ok cheers. Any idea of the dimensions and material? Don't suppose a nylon one would hurt would it? Anything similar on the front or is it a straight through spindle? Quote Link to comment Share on other sites More sharing options...
zerorev3rev4 Posted August 11, 2014 Report Share Posted August 11, 2014 an alloy tube would be best front be didfernt you allways need a tube inbetween Quote Link to comment Share on other sites More sharing options...
zazoo Posted August 29, 2014 Author Report Share Posted August 29, 2014 Ok thanks for the responses lads. Problem now sorted. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.