badmotofo Posted August 12, 2014 Report Share Posted August 12, 2014 My forks have been apart for a couple of months and I am not positive how the front fork is reassembled. Could someone confirm? Right now I have the damper inside the slider and extending through the bottom of the slider. The small spring and aluminum cap are then put onto the damper and the unit is inserted into the outer fork. I tried it with the small spring inside the slider but the slider would dig into the aluminum cap. Thanks, Quote Link to comment Share on other sites More sharing options...
feetupfun Posted August 12, 2014 Report Share Posted August 12, 2014 hard to do this just with words. If you say which TY250 you have I might be able to post up an exploded parts diagram or a photo showing what you want to know Quote Link to comment Share on other sites More sharing options...
badmotofo Posted August 12, 2014 Author Report Share Posted August 12, 2014 feetupfun, here are some photos of the forks. I bought these off eBay with the intention of fitting them to my TY175. I'm not sure what year they came from. The online parts diagram from yamaha looks different from this. Quote Link to comment Share on other sites More sharing options...
feetupfun Posted August 13, 2014 Report Share Posted August 13, 2014 TY250 - A model I think - with parts spread out along damper rod to show correct assembly The circlip/snapring that holds the anti-bottoming socket in the fork tube is not shown Quote Link to comment Share on other sites More sharing options...
feetupfun Posted August 13, 2014 Report Share Posted August 13, 2014 By the way your sliders/bottles/outers/bottoms are definitely A model because the oil drain screws face outwards. On later model TY250 twinshock forks the drain screws face rearwards Quote Link to comment Share on other sites More sharing options...
badmotofo Posted August 13, 2014 Author Report Share Posted August 13, 2014 Thanks for the photo. It looks like my problem was that I installed the large part of the anti-bottoming socket backwards. It now fits together as it should. Thanks again. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.