genesis dave Posted October 14, 2014 Report Share Posted October 14, 2014 Hi. I am new to the site and hoping that people can help me.I have a 1999 jtx 270 which has what appears to be a failed rear master cylinder. Can any one tell me how to remove the master cylinder from the frame so I can repair the master cylinder. Many thanks in advance Quote Link to comment Share on other sites More sharing options...
tltel Posted October 14, 2014 Report Share Posted October 14, 2014 From memory, I think you have to drop out the swing arm to get to master cylinder. Its only two bolts that hold M/c in place but there is not much room and as the pipe runs inside the s/arm It is a bit awkward. TLTEL Quote Link to comment Share on other sites More sharing options...
dadof2 Posted October 15, 2014 Report Share Posted October 15, 2014 As above, the "bolts" are allen (hex socket) head screws just above and behind the footrest Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.