roba Posted October 28, 2014 Report Share Posted October 28, 2014 Hey guys, my lad snapped the end of the rear brake pedal off. I've brought a replacement one, but struggling like hell to undo the old one, I'm scared stiff I'm going to strip the Allen bolt. Any tips would be appreciated. Cheers Rob Quote Link to comment Share on other sites More sharing options...
twistandnogo Posted October 28, 2014 Report Share Posted October 28, 2014 Hi - if it's the same as 2012 the Allen bolt passes through the frame and screws into the internal thread of a bush that fits into the lever pivot. This bush has an external nut at the rear that needs a 19mm spanner to hold or undo. Hope this helps. Quote Link to comment Share on other sites More sharing options...
crazybond700 Posted October 28, 2014 Report Share Posted October 28, 2014 (edited) On the older molder there is a sort of hollow bold which drops inside and over the brake pedal. I think it is the same on the new bike. looks like http://thumbs4.ebaystatic.com/d/l225/m/m2rzhMCrHHjHK0RJCH-xAdQ.jpg So unscrew it from the backside (side of the engine) Edited October 28, 2014 by crazybond700 Quote Link to comment Share on other sites More sharing options...
roba Posted October 28, 2014 Author Report Share Posted October 28, 2014 Thanks for the advice guys, I will give that a try tonight! Cheers Rob Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.