renegade master Posted November 4, 2014 Report Share Posted November 4, 2014 Hi Guys, I had a problem with clutch fulid leaking from the front sprocket shaft...... so after doing other work on the engine I decided to replace the seal (retain seal).... but I replaced this and its loose now and seems like some thing is missing??? I thought that once I replaced the retain seal that was the job done! nope there another part to it a shift seal bushing and 2 rubber o rings..... I put the old ones of these back again but they just fall down the gear shaft and dont seem to stay up beside the retain seal...... any ideas?? cheers Quote Link to comment Share on other sites More sharing options...
crazybond700 Posted November 5, 2014 Report Share Posted November 5, 2014 (edited) There should be (from out to in) a circlip, the sprocket, bushing, o ring 1.5mm o ring 2mm. From the inside this falls into the 2nd gear and its selector and 2 half neadle bearings. How did you replace the parts? Edited November 5, 2014 by crazybond700 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.