iconic558 Posted November 23, 2014 Report Share Posted November 23, 2014 Well just when you think you have done everything correctly during a strip down to help with the rebuild fate throws a spanner in the works.....like knocking over my temporary storage bench whilst parts are drying AND deleting strip down photos...doh! I now have all the front and rear axle assembly parts all mixed up, I can seperate most of the parts (most!) and but their 'as built' order is also hopelessly lost. Would anyone have a drawing/ photo of front and rear axle assemblies? Many thanks Quote Link to comment Share on other sites More sharing options...
b40rt Posted November 23, 2014 Report Share Posted November 23, 2014 If all was as standard it's not difficult to sort out. Rear, put axle in from brake side, then spacer with flat cut into it (so it can go all way forward and not foul brake anchor slot) through brake plate, hub, then top hat spacer which sits against bearing, then long alloy spacer, through swinging arm again. Front only has one spacer from memory. 1 Quote Link to comment Share on other sites More sharing options...
iconic558 Posted November 23, 2014 Author Report Share Posted November 23, 2014 B40rt you are a star sir, thanks. .....I do seem to have too many parts in the rear axle though......a few large washers? I did wonder why so many when stripping down...she must of collected a few over the years! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.