ktmpeak Posted December 30, 2014 Report Share Posted December 30, 2014 I just bought a 2002 GG txt 280 pro. The previous owner zip tied the brake res to the frame. Where should it be bolted to the frame? It looks like it is bolted near the top of the rear shock. Is this correct? I pic would be helpful. Thanks Quote Link to comment Share on other sites More sharing options...
lineaway Posted December 30, 2014 Report Share Posted December 30, 2014 They were attached to the cylinder head stay that mounts to the frame above the carb. It had a little slide on type bracket. The zip tie should work. Quote Link to comment Share on other sites More sharing options...
crazybond700 Posted January 2, 2015 Report Share Posted January 2, 2015 It used to be mounted on the engine bracket like lineway says. Quote Link to comment Share on other sites More sharing options...
tahoebrian5 Posted January 2, 2015 Report Share Posted January 2, 2015 That picture must be from a parallel universe where gasgas final drives are on the right 1 Quote Link to comment Share on other sites More sharing options...
fastbelly Posted January 2, 2015 Report Share Posted January 2, 2015 LOL, freaked me out too! Quote Link to comment Share on other sites More sharing options...
crazybond700 Posted January 2, 2015 Report Share Posted January 2, 2015 Its probably from england! They do everything wrong there, lol Quote Link to comment Share on other sites More sharing options...
ripgroove Posted January 17, 2015 Report Share Posted January 17, 2015 Its probably from england! They do everything wrong there, lol Steady! Our GasGas's have the same damn drive yours does! lol :-) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.