zander250 Posted December 31, 2014 Report Share Posted December 31, 2014 (edited) I was driving through a loch with my friend, I drove into a deep bit and the air box took some water in. I reached the other side and the bike died. When I kicked it, it started but it was struggling and if was given too much revs died. When I emptied the air box there was a lot of water. I have cleaned the carb and dried the spark plug as well (as it was wet). It will still not start does anyone have any ideas what is stopping it? Thanks Alexander MacLeod Edited December 31, 2014 by zander250 Quote Link to comment Share on other sites More sharing options...
jfc Posted December 31, 2014 Report Share Posted December 31, 2014 (edited) If you have a spark then you need to take the plug out and turn the bike upside down and turn the engine over by hand to remove any water from the crank. Once the water stops coming out you must get the bike running and allow it to get hot (rad fan running) and keep it running to ensure the crank bearings are well lubed. You must do this ASAP as the main bearings will start to form rust on the metallic surfaces if left with water in the crank, and then you will need to replace the bearings. Edited January 1, 2015 by jfc 3 Quote Link to comment Share on other sites More sharing options...
wakka Posted December 31, 2014 Report Share Posted December 31, 2014 2 Quote Link to comment Share on other sites More sharing options...
pat_56 Posted January 1, 2015 Report Share Posted January 1, 2015 Three of us drowned our 2 stroke dirt bikes in a bog. Stood each bike on their tail, drained carb, engine case and air filter on the spot. All 3 started, good thing, we were miles from civilization. Only one bike gave us trouble, I ran his spark plug in my bike for a couple minutes to get it hot, then put it back in his before we saw any signs of life in that one. 1 Quote Link to comment Share on other sites More sharing options...
burns1989 Posted January 1, 2015 Report Share Posted January 1, 2015 (edited) One thing you should never do is try and start it up with water in the air box or if u have dround it as you will end up hydrolickibg the engine and end up bending your conrod . If you end up getting water threw your air filter you should stop and dry it out and take the spark plug out and kick it over to eliminate any water Edited January 1, 2015 by burns1989 Quote Link to comment Share on other sites More sharing options...
zander250 Posted January 1, 2015 Author Report Share Posted January 1, 2015 Thanks for that I have emptied the engine of water and its got a spark Quote Link to comment Share on other sites More sharing options...
pat_56 Posted January 2, 2015 Report Share Posted January 2, 2015 Thanks for that I have emptied the engine of water and its got a spark How are you making out, bike running yet? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.