ric h Posted January 17, 2015 Report Share Posted January 17, 2015 WTF! A bolt on both sides of a pivot? How the heck are ya supposed to get these out? Last thing to remove before the frame powdercoat. Grrrrr! Quote Link to comment Share on other sites More sharing options...
digga Posted January 17, 2015 Report Share Posted January 17, 2015 Hi Ric If there the same as the 2012 ? Put a torx wrench in both sides of the mounting bolt and undo in a anti-clocwise direction,, the underside bolt should come out, then from underneath tap upwards with a drift or pin punch and the top shaft will come out, this has a 8mm female thread in it. Yes it's a bazar way of fixing pegs (unlike everyone else) BUT the pegs dont seem to wear on the shaft much as there a 10mm dia rather than 8mm like all the others. Hope this helps. Quote Link to comment Share on other sites More sharing options...
ric h Posted January 17, 2015 Author Report Share Posted January 17, 2015 Thanks Digga.I'll try it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.