nige02 Posted January 26, 2015 Report Share Posted January 26, 2015 Hi, I want to put a number board on my Evo, but I can't find a brake hose guide to replace the one on the light. The last time I didn't secure the brake line it ended up rubbing a groove in my folk clamps. I have looked everywhere but have had no luck so far. Any guidance would be appreciated, cheers Richard. Quote Link to comment Share on other sites More sharing options...
johnnyboxer Posted January 26, 2015 Report Share Posted January 26, 2015 Get a Montesa 4RT one, about £2-£3 from a Mont dealer Quote Link to comment Share on other sites More sharing options...
lineaway Posted January 27, 2015 Report Share Posted January 27, 2015 You could go to any main stream dealership (non-trials) and find one. Quote Link to comment Share on other sites More sharing options...
mags Posted January 27, 2015 Report Share Posted January 27, 2015 As JB has suggested... I put a Monty 4RT one on my wife's Beta 250 4T for comps. Mags Quote Link to comment Share on other sites More sharing options...
mags Posted January 27, 2015 Report Share Posted January 27, 2015 Here is a pic of how well it fits... no trimming needed, just 4 zip clips to hold it on. I used an automotive wiring loom clip to hold the brake line and still allow fork movement. Mags 1 Quote Link to comment Share on other sites More sharing options...
dan williams Posted January 27, 2015 Report Share Posted January 27, 2015 I put a heavy piece of plastic tape on the clamp. The stuff you normally use as a frame protector. Quote Link to comment Share on other sites More sharing options...
nige02 Posted January 27, 2015 Author Report Share Posted January 27, 2015 Thanks for all the replys, much appreciated. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.