nicos Posted February 13, 2015 Report Share Posted February 13, 2015 interesting! mine came with a delorto and a kehin in the box which I fitted myself! its been awhile so I stand corrected...! Quote Link to comment Share on other sites More sharing options...
nicos Posted February 13, 2015 Report Share Posted February 13, 2015 http://bsteady.blogspot.com/2011/03/2011-gas-gas-raga-250-specifications.html like this! Quote Link to comment Share on other sites More sharing options...
aussiechris Posted February 13, 2015 Author Report Share Posted February 13, 2015 Hi Nicos, That is interesting. The factory must have changed their mind at some point - looks like we're both right! Normally the 250 Raga got the Delorto and the 280 and 300 got the Keihin as standard. The strange thing about those photos is that, over here at least, it was the 2010 Raga that had the gold frame and tank. The 2011 model had a black frame and mostly white tank. 2011 Raga models also had the Reiger shock which has a purple coloured spring. I think that article is showing pictures of a 2010 Raga. The first picture (the closeup) is showing a 280 (says so on the barrel). The other pictures appear to be the 250 (hence the Delorto carb). Weird. All the best, Chris. Quote Link to comment Share on other sites More sharing options...
nicos Posted February 13, 2015 Report Share Posted February 13, 2015 (edited) mine is a 2011 280 white with black frame just like yours! posted that just to show the carb vent! Edited February 13, 2015 by nicos Quote Link to comment Share on other sites More sharing options...
gasgasshetland Posted October 11, 2016 Report Share Posted October 11, 2016 Can anyone tell me who in the uk sells the Xiu main bearings for GasGas pro. As this is the second time I'm having to replace them since the bike was new in May 2014 and not too keen to get the same type again from GasGas as 11 months and 17 months just doesn't seem very long for them to be lasting. Quote Link to comment Share on other sites More sharing options...
nigel dabster Posted October 11, 2016 Report Share Posted October 11, 2016 Id speak to kev at gas gas uk thats not usual or right. Quote Link to comment Share on other sites More sharing options...
baldilocks Posted October 11, 2016 Report Share Posted October 11, 2016 When installed last time was the oil feed lined up correctly on the ignition side bearing? Quote Link to comment Share on other sites More sharing options...
gasgasshetland Posted October 17, 2016 Report Share Posted October 17, 2016 Yeh was lined up. Got the bearing out yesterday on the gearbox side there was a lot of rust present on the small wire cage of the bearing. Also the small oring on the sprocket output shaft was split so possible water ingress into the oil through there. The bike has been a constant piece of work since getting it new, and it's my third GasGas but looking like it might be my last. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.