stpauls Posted February 1, 2015 Report Share Posted February 1, 2015 Here is a way of putting a number board on an Evo, while retaining the headlight. If you use a transparent number board then you can still use the light. You don't need to alter the brake or clutch cables, or anything else. You will need: A number board. Some long cable ties. 4 30mm lengths of soft plastic tubing - 10mm - 20mm bore. drill + 5mm bit. (You may need to join short cable ties together to make long ones). Look at the pictures to see how I did it. I have used this for the last year, with a trial every week and I have not had any issues with it at all. Also, I have a drinks bottle carrier attached with cable ties, It is sitting on a piece of inner-tube rubber to protect the forks from scratching. Nearly a year, used weekly with no issues. PS: Don't use a plastic bottle holder, because it will break when you go over logs. Quote Link to comment Share on other sites More sharing options...
steam Posted February 1, 2015 Report Share Posted February 1, 2015 That's interesting, I have been trying to find a way of fixing a drinks bottle to a rev 3 . Will try this unless any other ideas are forthcoming. Cannot use cut inner tube fixed over centre of h'bars as stop button would not be accessable Quote Link to comment Share on other sites More sharing options...
2stroke4stroke Posted February 1, 2015 Report Share Posted February 1, 2015 (edited) I suppose if you really can't do without the light then this is a way to have a flat number board with no disadvantage. I've seen the bottle thing before. Sorry if this seems harsh but I just do not understand the logic behind paying a lot of money for a highly developed bike then strapping a one pound weight to one side of the steering. At least when Yrjo Vesterinen put lead weights on the Bultaco forks way back when he did it so as not to unbalance the steering. Is there not a way of strapping the bottle to the handlebar brace so that it is central if you can't carry a bag? Edited February 1, 2015 by 2stroke4stroke Quote Link to comment Share on other sites More sharing options...
wobblenorbed Posted February 1, 2015 Report Share Posted February 1, 2015 That's interesting, I have been trying to find a way of fixing a drinks bottle to a rev 3 . Will try this unless any other ideas are forthcoming. Cannot use cut inner tube fixed over centre of h'bars as stop button would not be accessable Could you not just move the kill switch? Quote Link to comment Share on other sites More sharing options...
sirdabalot Posted February 1, 2015 Report Share Posted February 1, 2015 This may be of interest to Ossa riders too, as some have the battery boost start attached to the light so numbers need to be taped to the headlight. Quote Link to comment Share on other sites More sharing options...
steve_earle Posted February 1, 2015 Report Share Posted February 1, 2015 How about the simple bulldog clip, Been using one for years and have never lost a number even when giving it some on a straight. Used on 2 gas gas and 1 sherco now. Quote Link to comment Share on other sites More sharing options...
steve_earle Posted February 1, 2015 Report Share Posted February 1, 2015 I'm not knocking your creativeness but I could imagine it slicing someone to pieces in an accident. If I was machine examining and came across it you would be back to your car for some wire cutters before riding. I do mean this nicely, Please no offence. Quote Link to comment Share on other sites More sharing options...
billyt Posted February 2, 2015 Report Share Posted February 2, 2015 An answer to a question that has never been asked. Why o why? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.