griffiths of wales2 Posted March 8, 2015 Report Share Posted March 8, 2015 Hello all. My final drive shaft has a fair bit of wear to the splines, before I get the TIG set out, is this shaft common to any other engines? XL185 etc Thanks for taking a look at my post. Mark Quote Link to comment Share on other sites More sharing options...
esteve Posted March 8, 2015 Report Share Posted March 8, 2015 Part number is 23221-437-000. Still available new from at least 2 popular stockists of NOS Honda spares. 437 is the model code for an XL125S. 1 Quote Link to comment Share on other sites More sharing options...
alan Posted March 9, 2015 Report Share Posted March 9, 2015 (edited) I can find one UK stockist that can get hold of this part.. is it by any chance interchangeable with the TLR 200 ? I believe the TLR 200 part number is 23221-446-000, but this seems to be unavailable any where. By the way, I am not sure if you intend to weld the sprocket to the shaft.. A better solution may be to grind the teeth off an old sprocket with good splines and weld the centre to the outside of the new sprocket. You need to tack them together on the shaft to line the splines up (don't go mad and melt the oil seal). Once welded the old centre will be driving off the unworn splines outboard of the groove. The only thing to prevent the sprocket coming off the shaft is now the cover, but if the chain is in line this should not be a problem. Edited March 9, 2015 by alan Quote Link to comment Share on other sites More sharing options...
griffiths of wales2 Posted March 12, 2015 Author Report Share Posted March 12, 2015 Thanks Gents. I'll check those numbers out then, cheers for that. I'll probably end up TIG welding the worn edges and grind back to original size, bit of a potch but got to be done. Thanks again. Mark Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.