Jump to content

Cota Clutch


allyboy
 Share

Recommended Posts

Hi Guys

I have been getting the 123 ready for action and have realised that the clutch is still a bit weird, i can sit in second and hold the bike back with my legs, in first it does pull but I cant get a sharp take away from a standstill. i have got ATF in the box just now but did have a heavier oil in before. I have noticed the lever is very close to the bottom of the frame it could be touching perhaps. Any advice welcome.. thanks Aly

Link to comment
Share on other sites

 

 
 

There was a new development today. I fired up the cota and drove around, there was a much better bite and I was able to get the wheel up much better I drove got about ten mins then noticed a lot of ATF being forced out the breather does this mean anything? I didn't have Time to drain and fill but was wondering if the cases were being pressurised from a leaky seal. Ideas please thanks Ally.

Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...