millerme Posted March 9, 2015 Report Share Posted March 9, 2015 hi guys tried to change the main seal on the bully this eve ,used a air impact gun got the crank nut off but no luck on the clutch nut seam to be on very tight any ideas would be gratefully appreciated on the removal Quote Link to comment Share on other sites More sharing options...
boghopper350 Posted March 9, 2015 Report Share Posted March 9, 2015 are you locking the clutch mechanism with a locking tool ? Quote Link to comment Share on other sites More sharing options...
lbhbul Posted March 9, 2015 Report Share Posted March 9, 2015 The clutch hub is very difficult to hold, you will probably need to make/buy holding device probably Inmotion or E Bay, you can sometimes hold the hub carefully with heavy gloves & using air impact get them loose. A tool can be made from non eared clutch plate with a suitable handle welded welded to it. Good Luck Larry Quote Link to comment Share on other sites More sharing options...
bondy Posted March 9, 2015 Report Share Posted March 9, 2015 Quote Link to comment Share on other sites More sharing options...
millerme Posted March 9, 2015 Author Report Share Posted March 9, 2015 hi guys just bought a clutch holding tool for inmotion it a Sammy miller type tool not the laser cut ones as I see on the net as they do bend a lot in use 1 Quote Link to comment Share on other sites More sharing options...
boghopper350 Posted March 9, 2015 Report Share Posted March 9, 2015 That should help, I had to use a 3 ft long piece of scaffold tube over a wrench once to get one undone (my air wrench wouldn't touch it!!) Quote Link to comment Share on other sites More sharing options...
lbhbul Posted March 9, 2015 Report Share Posted March 9, 2015 Looks like millerme gets around smartly by looking at the post times!!! Good show! Larry Quote Link to comment Share on other sites More sharing options...
bondy Posted March 10, 2015 Report Share Posted March 10, 2015 hit it with a big Hammer? joking the tool will be abig help. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.