Jump to content

Draining Oil On Marzocchi 40Mm Forks, Struggling


magicmat
 Share

Recommended Posts

Hi all,

Im strugging to disassemble the forks and then drain to change my oil and seals.

I have a 2011 Raga, with 40mm Marzocchi forks, and im struggling to remove the top cap as it feels tight.

Am i right in thinking you just unto the top nut in a conventional manner? with a socket and just undo? .. it felt as though it tightened up was all.

the top of the fork also has little holes, so i wasnt sure if it was a special tool, but looking at the diagram, i dont think it is

fork%20diagram_zpssikxrugk.png

the 2006 servicing, on this site

http://www.trialspartsusa.com/tech.html

doesnt give me tons of info about this.

Thanks

Matt

Link to comment
Share on other sites

 

 

yeah loosened those, the cap starts to turn but then pinches, hense i thought i was turning the wrong part and wondered if it was a special tool that had to match the holes around the edge, but looking at that diagram i dont think it is

Link to comment
Share on other sites

 

One side (all Silver) should be just as normal but the other side (Red & Silver) just the centre nut will turn, this bit adjusts the preload on the fork spring and turns just a couple of turns then goes tight at the end of its adjustment. Depending how tight the cap is it will come undone if you kept going if it won't then you need a tool that locates in the holes.

Link to comment
Share on other sites

 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...