scorpatic Posted March 24, 2015 Report Share Posted March 24, 2015 I am contemplating the purchase of a 2015 model Sherco 250. Is there anything that the forum can tell me about this model? I am a clubman rider of around ten years experience. Quote Link to comment Share on other sites More sharing options...
michael_t Posted March 24, 2015 Report Share Posted March 24, 2015 I would also be interested to know... mine should arrive in a couple of weeks Quote Link to comment Share on other sites More sharing options...
bilks Posted March 24, 2015 Report Share Posted March 24, 2015 My son rides a 2015 Sherco 250 on the novice route.and so far is well pleased,and his riding buddy had a 300, Sherco 2015 but traded it in for a 250 model.and he rode it this week-end past.and said it was a lot easier to ride, no arm wrenching stuff,which he had with the 300,lol Quote Link to comment Share on other sites More sharing options...
michael_t Posted March 24, 2015 Report Share Posted March 24, 2015 Seeing as I am going from being very happy with a 200... the fact that the 250 sounds manageable is AWESOME news ! Quote Link to comment Share on other sites More sharing options...
shercoben12 Posted March 24, 2015 Report Share Posted March 24, 2015 go for it. the 250 does not have the keihin carb on there fore wont be as snappy and will be nice. i got my new 125 2015 sherco 3 weeks ago. the shercos have improved an awful lot in the last couple of years. they are great bikes. heres some tips for maintenance: when washing put a bung in the exhaust so you dont spoil the packing with water. take the airfilter out and stuff a clean rag down there so you block the hose. then clip the cover back down ( this takes seconds) you need to do this because it is very easy to fill the airbox up with water as the intakes are at the top of the frame and open. i have used this method and my airfilter is still brand new and i have done a couple of trials and lots of practice. also theres not a drop of dirt in the air box. fit an inline fuel filter. again really easy job takes a few minutes. just put it inbetween the pump and fuel tap. take the fuel hose of and cut out the right length and clip the filter in. this will stop mud and grit getting in the carb and engine eventually. it is really easy if muddy to get mud in the tank . tape over the cap when riding if muddy. take the stand of as this can clog up the swing arm with leaves and mud slowing the rear wheel down. again just like with any new bike you should go over everything and grease the bearings after a few rides, along with bolts like the fork clamps and wheelspindles. from new this year they seem to have a good enough amount of grease in already so like i said you can wait a few rides for this. i would change oil after 2nd ride. any more questions just post. good luck your love it! 1 Quote Link to comment Share on other sites More sharing options...
michael_t Posted March 24, 2015 Report Share Posted March 24, 2015 Thanks very much for the info... I love these forums for this sort of information - funny how some things don't get mentioned in manuals. Any and all tips and tricks are greatly appreciated Quote Link to comment Share on other sites More sharing options...
ian640 Posted March 25, 2015 Report Share Posted March 25, 2015 I have one and no issues with the bike. No significant mods needed. I've tried a few other bikes over the years and come back again to the Sherco 250. The only bike I'd even consider as an alternative is the new Scorpa - looks more or less the same bike except the frame surrounds the radiator and the fuel tank is in the more conventional spot. Quote Link to comment Share on other sites More sharing options...
cascao Posted March 31, 2015 Report Share Posted March 31, 2015 One 300 on the way for me!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Quote Link to comment Share on other sites More sharing options...
scorpatic Posted June 8, 2015 Author Report Share Posted June 8, 2015 ok I have had it for a couple of weeks now. and I like it. very similar in many ways to the Ossa. does anyone think the aftermarket titanium header pipe is worth it? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.