wobbler Posted May 5, 2015 Author Report Share Posted May 5, 2015 Just a quick update !!! The guy that supposedly rebuilt it was called Nev erfinished ajob !!!!!!! No cank seal in the balance weight side and nothing tightened up ..... So it's a spilt it and check from start to finish .... A couple of spacers and circlips missing too !!!' Miracle it started ...... Hopefully ready for the next twinshock round in June !!!!!' Cheers As always The Wobbler Quote Link to comment Share on other sites More sharing options...
axulsuv Posted May 6, 2015 Report Share Posted May 6, 2015 Keep the Faith , it'll make you giggle when it's right ... They are FUN little bikes . Glenn Quote Link to comment Share on other sites More sharing options...
wobbler Posted May 13, 2015 Author Report Share Posted May 13, 2015 So today's progress and traumas ..... Chain tensioner sorted !!! The inside of the rear brake plate seems to be catching the inside of the hub ... Is the wheel the same as a 125 wheel ?? Crank seals here engine ready to go back together!! Front forks have no seals in & there appears to be no groove for a circlip ?? How do they stop in!!!! Thanks for any help as normal ??? As always The Wobbler Quote Link to comment Share on other sites More sharing options...
axulsuv Posted May 14, 2015 Report Share Posted May 14, 2015 I think the 125 had a bigger hub and rim , Not sure though . I got my fork seals from Bill Pye , a several years ago now , I remember something weird with the forks , but not what it was ... Contact Bill , He'll sort you out . Glenn Quote Link to comment Share on other sites More sharing options...
wobbler Posted June 8, 2015 Author Report Share Posted June 8, 2015 Well - I rode it and finished ......need to improve my throttle control !!!! Good fun though 80 mono next !!!! A few more cc's can't hurt ! As always The wobbler Quote Link to comment Share on other sites More sharing options...
axulsuv Posted June 8, 2015 Report Share Posted June 8, 2015 Told 'ya there fun little bikes ... Quote Link to comment Share on other sites More sharing options...
wobbler Posted June 17, 2015 Author Report Share Posted June 17, 2015 Any one got a front & rear wheel for one - or will anything else fit ??? Cheers the wobbler !!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.