smelling123 Posted April 18, 2015 Report Share Posted April 18, 2015 How many teeth on final drive and rear wheel sprocket for standard 247 please? Anyone and opinion on better combination? Thanks Quote Link to comment Share on other sites More sharing options...
pro sport Posted April 18, 2015 Report Share Posted April 18, 2015 Hi If we are talking Cota 247 mk1 through to mk5 ( UKR ) then the standard final drive was 10 T and rear sprocket 48 T. Mine was originally running this setup but our Club sections are usually based on tight turns and sharp instant climbs so I fitted a 9 T final which gives a nice low 1st gear ideal for slow speed turns without using the clutch and better 2nd gear use for general use and 3rd for long climbs and muddy work. The only drawback would be Top Speed if you did any roadwork on your trials! The other benefit of just changing the final drive is the gear is cheap and easy to change. Cheers Dave Quote Link to comment Share on other sites More sharing options...
smelling123 Posted April 19, 2015 Author Report Share Posted April 19, 2015 Thank, that explains a lot. This one is 11x48 and feels too high geared. Cheers Quote Link to comment Share on other sites More sharing options...
wobbler Posted April 20, 2015 Report Share Posted April 20, 2015 9 - 42 on mine ...... Seems to work ok Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.