axulsuv Posted April 19, 2015 Report Share Posted April 19, 2015 Do you folks think I'd be wise to mod my frame (aka drill & chamfer a hole ) for my clutch pipe and throttle cable as Bill Pye did to this one he built ? The 97 section has no fork stops , except for o-rings on the fork down tubes and they tend to pinch the clutch pipe and throttle cable at full lock with the stock routing ... The one little hole would be easy to do and makes sense to me before I install a new clutch pipe ... It is routed to the top of the radiator guard thru a notch that it doesn't stay in , this makes for a much more natural , relaxed path ... Bill's bike ; http://www.nickandkaren.co.uk/frankfieldfantic.co.uk/Mono%20shock%20special%201.jpg And Mine will look slicker than that when done . (I hope ) Glenn Quote Link to comment Share on other sites More sharing options...
nelly1 Posted April 19, 2015 Report Share Posted April 19, 2015 Hell yeah mate why not Quote Link to comment Share on other sites More sharing options...
axulsuv Posted April 19, 2015 Author Report Share Posted April 19, 2015 My Thoughts exactly ... Quote Link to comment Share on other sites More sharing options...
copemech Posted April 20, 2015 Report Share Posted April 20, 2015 What's the worst thing that could happen? Quote Link to comment Share on other sites More sharing options...
biffsgasgas Posted April 20, 2015 Report Share Posted April 20, 2015 Improved function, less failure opportunity, combined with better look... Here is the true sign. If you excitedly tell a Mrs what your thinking and her eyes glaze over. Its a no brainer. Go for it! --biff 1 Quote Link to comment Share on other sites More sharing options...
axulsuv Posted April 21, 2015 Author Report Share Posted April 21, 2015 OK ! the drill and dremal tools come out Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.