motosolex Posted January 29, 2019 Report Share Posted January 29, 2019 Excellent tips. Any issues with the carb hitting up against anything? Any pictures since this was posted? thanks. Quote Link to comment Share on other sites More sharing options...
section swept Posted January 29, 2019 Report Share Posted January 29, 2019 This mod could possibly make TY 175 prices go up a tad? Quote Link to comment Share on other sites More sharing options...
trialsrfun Posted January 29, 2019 Report Share Posted January 29, 2019 On 1/29/2019 at 4:52 AM, motosolex said: Excellent tips. Any issues with the carb hitting up against anything? Any pictures since this was posted? thanks. Expand In addition to the above is there also a boost bottle pipe connector which would need blanking off? Quote Link to comment Share on other sites More sharing options...
scifi Posted January 30, 2019 Report Share Posted January 30, 2019 I think this mod could explain why one of my TYs outperforms the other, ( that does not have the RD inlet.). It has instant wheel lifting power, instead of the slow build up of speed. I did notice on one section, that the engine stalled when asked to power over a 4 foot turning bump, something my old 350 Bultaco would have just thump-thumped over. Quote Link to comment Share on other sites More sharing options...
motosolex Posted June 19, 2019 Report Share Posted June 19, 2019 Where on air box did you fellows put additional air holes for intake? I got the RD intake and new reeds. So far so good! Quote Link to comment Share on other sites More sharing options...
motorcycleemptyness Posted July 14, 2021 Report Share Posted July 14, 2021 On 5/14/2015 at 4:04 PM, heavywrecker said: Just a word of thanks to all the Sages on here for their advice & knowledge. I have fitted an RD350 inlet rubber to my TY 175 and it DOES make a difference. Put some more holes in the airbox too. There is an induction noise now, excellent ! Cheers ! Expand Which model RD350 is that from ? The one with the link pipe hole in the top ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.